TIGOR EV

SUSPENSION 39 10. ON VEHICLE REPAIRS REAR SUSPENSION 10.1. DISASSEMBLY AND ASSEMBLY OF REAR SHOCK ABSORBER FROM VEHICLE  DISASSEMBLY 1. Lift the car using two post lift. 2. Remove Rear wheel. 3. Position the hydraulic jack below trailing arm near strut mounting bottom bracket of twist beam in such a way that it slightly compress the rear strut 4. Using suitable spanner loosen the mount nut. 5. Unscrew the strut holding bolts along with washer. 6. Remove both the shock absorber fasteners holding the twist beam using hydraulic jack at any one side.] 7. Now slowly release and hold the hydraulic jack pressure & remove the strut.  INSTALLATION: Carry out the above step in reverse order for its assembly.in appropriate sequence. 5.9.1 Note:  Ensure washer to be added on bolt before tightening.  Tighten the RTB pivot bolt in ECIE/preload condition.  No jacking to be done under the beam portion of RTB.  Avoid oil based lubricant while pressing the bush in RTB pivot eye.  Instead soap based solution can be used.