TIGOR EV

SUSPENSION 37 9.7. REMOVAL AND INSTALLATION OF LOWER ARM RUBBER BUSHES A. Lower arm front pivot bush  Removal: 1. Remove front pivot bush using special tools as shown in below arrangement. NOTE: Apply soap and water to the bush, the inner surface of the tool and the bore of assembly lower link before installation.  Installation: 1. Install front pivot arm bush using special tools as shown in below arrangement. B. Lower arm rear pivot bush  Removal: 1. Remove Rear pivot bush using special tools 2702 5890 3218. NOTE: Apply soap and water to the bush, the inner surface of the tool and the bore of assembly lower link before installation.  Installation: 1. Install rear pivot arm bush using mallet.