TIGOR AMT

TIAGO/TIGOR AMT Gasoline DTC Troubleshooting Guide Version: 4.0 Date: 18-04-2017 Author: Sathi/Anupama Page: 426 of 427 Copyright © TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. -TCU damage 126 P060C- 07 Level 3 Intervention – System problem -Wiring harness problem -Hardware damage -Wrong execution conditions -TCU damage 127 P1844 - 07 Grid Self tuning Procedure – Error -Wiring harness problem -Wrong execution conditions -Wiring Harness Connections - TCU 128 P080A - 07 Kiss point Self tuning Procedure – Error -Wiring harness problem -Wrong execution conditions -Wiring Harness Connections - TCU 129 P185B - 07 Clutch Stroke Self tuning – Error -Wiring harness problem -Clutch assembly 130 P1886- 07 -Dual Port RAM Check -Hardware damage - TCU damage 131 U0001- 01 -CAN EMS Error - Wiring harness problem -Electromagnetic interference -High frequency noise. 132 C0082- 00 ABS Status CAN signal Invalid -ABS Unit Problem -Check ABS Service Manual 133 U0001- 88 Vehicle Communication Bus - Bus off - Wiring harness problem CAN_H and CAN_L wires 134 U0121- 08 Lost communication with Antilock Braking System- ABS Bus signal/ Message Failure -At least a message of ABS node is missing. -Disconnection of the ABS connector -CAN_H and CAN_L lines open at TCM connector end 135 U0155- 08 Lost communication with Instrument Panel Cluster Module- Bus signal/ Message Failure -At least a message of IPC node is missing. -Disconnection of the IPC connector -CAN_H and CAN_L lines open at TCM connector end 136 U0100- 08 Loss of communication with Engine Control Module- Bus Signal/ Message Failure -At least a message of EMS node is missing. -Disconnection of the IPC connector -CAN_H and CAN_L lines open at TCM connector end 137 P1C10- 01 Invalid Data Received From ECM-Cyclic Redundancy Check Error -EMS (106 frame)Checksum different from that one received -Electromagnetic interference - High frequency noise 138 P1C11- 02 Invalid Data Received From ECM -Message Rolling Counter Error -EMS (106 frame) rolling counter does not change in two consecutive frames. -Electromagnetic interference - High frequency noise. 139 P1C12- 01 Invalid Data Received From ECM-Cyclic Redundancy Check Error -EMS(108 frame)Checksum different from that one received -Electromagnetic interference - High frequency noise.