TIGOR AMT

TA65 Star AMT 22 9. Remove ball joint (steering rack) from steering knuckle from RH & LH sides 10. Remove stub axle ball joint Mtg. & Remove Lower Control Arm (LCA). 11. Drain the Transaxle oil from Drain plug as shown below 12. Swing out both drive shafts from transaxle and place it suitably alongside. Do not pull drive shaft excessively as the plunge joint will come out of housing and damage the boot Pry. Plunge joint housing for taking out joint out of splines. Do not place the CV drive shaft on rough / uncleaned surfaces. This might damage the drive shaft boot. 13. Disconnect Transmission arthing cable from Gear Box. 14. Lower the car & support the Engine from Bottom side. 15. Remove B-Mount Nut & Loosen B Mounting stud as shown 16. Remove starter motor mounting Bolt.