TIAGO TIGOR BSVI - SERVICE MANUAL - DTC 24-12-2021

Prepared by: Airbag COC Review Approved by: Sanjeev VM Page: 615 of 648 Copyright © TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. SRS / Airbag ECU AB12 DTC Troubleshooting Guide Version: 2.0 Date: 21-June-2021 1. Clear the DTC’s & make sure no DTC’s are present for Airbag system 2. Check whether any new DTC’s are getting qualified for repeated cranking. 3. Ensure the Airbag Warning Lamp Indication is continuously ON in Instrument Cluster for 3 seconds after Ignition ON 4. Ensure the Airbag Warning Lamp Indication goes OFF after 3 seconds from Ignition ON. Circuit Schematic Diagram:- Schematic shown below for illustration Battery>>>>>Fuse>>>>Relay>>>>>>>Sensor/Actuator>>>>>ECU Component Location & Image:- PAD Indication is present in the Instrument cluster or in SBR display Fig145:- PAD indication + V 12 Battery A15 CAN L Ignition Switch CAN H A1 A6 - RESTRAINTS CONTROL MODULE Restraint System Passenger Airbag Indicator A11 A12 Fuse 10A A4 GND PADI Vbat