TIAGO TIGOR BSVI - SERVICE MANUAL - DTC 24-12-2021

Prepared by: Airbag COC Review Approved by: Sanjeev VM Page: 584 of 648 Copyright © TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. SRS / Airbag ECU AB12 DTC Troubleshooting Guide Version: 2.0 Date: 21-June-2021 B0073-55:- Second Row Driver Seatbelt Pretensioner Deployment Control not configured Overview:- ISO Code B0073-55 Customer Symptom SRS Warning Lamp continuously ON in Instrument Cluster. Fault Effects (On Vehicle) Second Row Driver Seatbelt Pretensioner deployment not guaranteed, if a crash happens Lamp Status (If Any) SRS Warning Lamp continuously ON in Instrument Cluster. Fault Detection Condition Second Row Driver seatbelt Pretensioner Deployment Device is not configured in EOL, but physically present in the vehicle Normal Operating Condition Configuration & physical presence in the vehicle should be as per the VC. Probable Trouble Area Related wiring Harness, connector or terminals Second Row Driver Seatbelt Pretensioner Module Airbag Wiring Harness Airbag ECU Healing Condition Correct System configuration should be written to Airbag ECU as per VC. Passenger Knee Airbag physical presence should be as per VC. Component Details:- (Refer Annexure 2 for Mounting Location of AB12 Airbag ECU) Second Row Driver Seatbelt Pre tensioner Module : - It is located at the rear passenger door wheel arch inner panel. Airbag ECU : - It is fitted in the floor of central console in the car. The Airbag Electronic Control Unit (ECU) controls the deployment system to allow an appropriate igniting of the Airbags and belt pre-tensioners to restrain the driver and passengers Preliminary Checks:- 1. Check Battery Voltage (12 V & above) 2. Check for any faults in Airbag Warning Lamp indication in Instrument Cluster. 3. Ensure the proper locking of Airbag ECU wiring harness connectors in the vehicle by the locking sound. Troubleshooting:-