TIAGO TIGOR BSVI - SERVICE MANUAL - DTC 24-12-2021

Prepared by: Airbag COC Review Approved by: Sanjeev VM Page: 450 of 648 Copyright © TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. SRS / Airbag ECU AB12 DTC Troubleshooting Guide Version: 2.0 Date: 21-June-2021 B1038-12:- Passenger Seat Belt Buckle Switch short to battery Overview:- ISO Code B1038-12 Customer Symptom SRS Warning Lamp continuously ON in Instrument Cluster. Fault Effects (On Vehicle) Passenger Airbag deployment not guaranteed, if a crash happens Lamp Status (If Any) SRS Warning Lamp continuously ON in Instrument Cluster. Fault Detection Condition This fault gets logged when the Passenger Seat Belt Buckle Switch circuitry gets shorted to battery. Normal Operating Condition No short with battery should be present. Probable Trouble Area Related wiring Harness, connector or terminals Passenger Seat Belt Buckle Switch deployment Module Airbag Wiring Harness Airbag ECU Healing Condition Remove the short to battery. Component Details:- (Refer Annexure 2 for Mounting Location of AB12 Airbag ECU) Passenger Seat Belt Buckle Switch: - Passenger Seat Belt Buckle Switch Airbag ECU : - It is fitted in the floor of central console in the car. The Airbag Electronic Control Unit (ECU) controls the deployment system to allow an appropriate igniting of the Airbags and belt pre-tensioners to restrain the driver and passengers Preliminary Checks:- 1. Check Battery Voltage (12 V & above) 2. Check for any faults in Airbag Warning Lamp indication in Instrument Cluster. 3. Ensure the proper locking of Airbag ECU wiring harness connectors in the vehicle by the locking sound. Troubleshooting:-