TIAGO TIGOR BSVI - SERVICE MANUAL - DTC 24-12-2021

Prepared by: Airbag COC Review Approved by: Sanjeev VM Page: 37 of 648 Copyright © TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. SRS / Airbag ECU AB12 DTC Troubleshooting Guide Version: 2.0 Date: 21-June-2021 B0020-55:- Side Airbag Front LH Deployment Control not configured Overview:- ISO Code B0020-55 Customer Symptom SRS Warning Lamp continuously ON in Instrument Cluster Fault Effects (On Vehicle) No effect Lamp Status (If Any) SRS Warning Lamp continuously ON in Instrument Cluster Fault Detection Condition Side Airbag Front LH Deployment Device is not configured in EOL, but physically present in the vehicle Normal Operating Condition Side Airbag Front LH configuration & physical presence in the vehicle should be as per the VC. Probable Trouble Area Related wiring Harness, connector or terminals Side Airbag Front LH System Configuration Airbag ECU Healing Condition Correct System configuration should be written to Airbag ECU as per VC. Side Airbag Front LH physical presence should be as per VC. Component Details:- (Refer Annexure 2 for Mounting Location of AB12 Airbag ECU) Side Airbag Front LH Module: - This airbag is located in seat which inflate between the occupant and door. Airbag ECU : - It is fitted in the floor of central console in the car. The Airbag Electronic Control Unit (ECU) controls the deployment system to allow an appropriate igniting of the Airbags and belt pre-tensioners to restrain the driver and passengers. Preliminary Checks:- 1. Check Battery Voltage (12 V & above) 2. Check for any faults in Airbag Warning Lamp indication in Instrument Cluster. 3. Ensure the proper locking of Airbag ECU wiring harness connectors in the vehicle by the locking sound. Troubleshooting:-