TIAGO TIGOR BSVI - SERVICE MANUAL - DTC 24-12-2021

X0 MCE (Tiago / Tigor) Instrument Cluster DTC Troubleshooting Data Version: 1.4 Date: 14-Dec-19 Author: Jeeva Raj / Sharad Shivane Page: 72 of 135 Copyright © TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. U3006 - 17:- Control Module Input Power “ A” – Circuit Voltage above Threshold Overview: - This fault will come if Input Power "A" is more than threshold voltage (In ignition on & engine running condition) Input Power "A" - is the Voltage Supply from battery. ISO Code U3006 - 17 Customer Symptom IC (display, gauges etc) goes OFF Fault Effects (On Vehicle) Cluster will be OFF Lamp Status (If Any) NA Fault Detection Condition If Battery(supply) voltage goes above 16V Normal Operating Condition IPC shall work normally in the operating voltage range of: 8V to 16V (Tolerance ± 0.2V). Probable Trouble Area Discharged Battery Fuse blown (3 amp) Battery cable terminal (corroded/Sulphation/Loose) High resistance within the supply cable. IPC power connector loose etc. Healing Condition N/A Component Details:- N/A Preliminary Checks:- 1. Voltage at the battery terminals should be greater than 8V at the Ignition ON Condition. 2. IPC power supply connector should have greater than 8V for normal functionality of IPC. 3. Check battery cable and IPC connector terminals for damage. 4. Check IPC ECU for pin bend/damage.