TIAGO TIGOR BSVI - SERVICE MANUAL - DTC 24-12-2021

X0 MCE (Tiago / Tigor) Instrument Cluster DTC Troubleshooting Data Version: 1.4 Date: 14-Dec-19 Author: Jeeva Raj / Sharad Shivane Page: 50 of 135 Copyright © TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. Connector View & Information:- N/A Inspection Method:- N/A B1936 - 56:- Odometer Values missing From BCM / PEPS for Learning Overview:- ISO Code B1936- 56 Customer Symptom N/A Fault Effects (On Vehicle) N/A Lamp Status (If Any) N/A Fault Detection Condition N/A Normal Operating Condition IC shall communicate with the BCM/ PEPS for Odo learning After ignition On & after ignition Off. Probable Trouble Area Related wiring Harness, connector or terminals damaged IPC connector wired wrong, Harness wire shorted. BCM / PEPS proper working. Healing Condition Clearing the Fault. Ignition On/Off Component Details:- N/A Preliminary Checks:- 1. Check Battery Voltage is normal in the range (9v - 16v) 2. Check CAN i/p lines between IPC & BCM / PEPS for Pinch/Cut. 3. Check ECU & CAN signal pin for oxidation, bending & damage. 4. Check CAN signal at Pin no. J1-5 & J1-6 of the ECU connector.