TIAGO TIGOR BSVI - SERVICE MANUAL - DTC 24-12-2021

Vehicle Platform: Zest, Bolt, Tiago, Tigor, Osprey, Q501, X451, Q502 ECU Name: Hella Body Control Module (BCM) DTC Troubleshooting Data Version: 3.1 Date: 30-11-2019 Author: BCM COC Page: 683 of 1106 Copyright © TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. B2213 - 11: Front Wiper Park Position Signal - Circuit Short to Ground Overview: ISO Code (DTC Code) B2213 - 11 Customer Symptom Front and rear wash/wipe may not function correctly Fault Effects (On Vehicle) Front and rear wash/wipe may not function correctly Lamp Status (If Any) NA Fault Detection Condition This fault will be logged after the input switch test routine execution. User has to operate the switch manually during routine. If short to ground fault is detected for Front wiper park position signal then this DTC code will be returned with the Routine results. Normal Operating Condition There should not be any fault returned by routine Probable Trouble Area 1. BCM connector Fault 2. Cockpit wiring harness short to ground 3. BCM ECU fault Healing Condition 1. Ignition OFF  ON 2. Clear DTC Command Component Details: Front wiper Park Position Signal part of front wiper motor and interfaced to the BCM as a feedback input. If the IGN is on and if user put the combi switch to front wiper on position, front wiper park position signal gives a feedback to BCM about the in park and out of park of the front wiper. Preliminary Checks: 1. Check Battery Voltage (9V-16V) 2. Check ECU pins for oxidation, bending & damage. Trouble Shooting:-