TIAGO BSVI MCE - SERVICE MANUAL

ELECTRICAL 65 vehicle is moving NOTE:  INST FE will vary frequently as per driving pattern.  The INST FE display does not show Fuel Economy of last drive.  The indication on the display may be delayed if fuel consumption is affected by driving pattern.  Change of unit is not applicable 6 Clock  Indicates current time in 12 Hour or in 24 Hours mode as per user selection.  User can perform the clock setting when vehicle is not moving and Ignition/Engine is ON NOTE:  User requested to do clock settings in Infotainment system when Infotainment is present in the vehicle.  Whenever the battery terminals or related fuses are connected User must reset the clock time. This feature is available when ignition switch is in ON position. 7 Outside Ambient Temperature  Displays outside ambient temperature in units °C.  Resolution: 1 °C Note:  The temperature sensor is in the front bumper of the vehicle, therefore the temperature reading can be affected by heat reflection from the road surface, engine heat and the exhaust from surrounding traffic. This can cause an incorrect temperature reading when speed is under low speeds or when stopped.  If display shows ‘- - ‘, take your car to TATA authorized service Centre. 8 Service reminder  Indicates the number of days or kilometers remaining for next service at every ignition ON for few seconds if service is due.  If service is overdue, DIS will display 0 km or 0 days and spanner symbol shall blink at every ignition ON for few seconds.