TIAGO BSVI MCE - SERVICE MANUAL

GEARBOX 7 18. Pull out Knuckle Assembly and Swing out both drive shafts from transaxle and place it suitably alongside. Do not pull drive shaft excessively as the plunge joint will come out of housing and damage the boot Pry. Plunge joint housing for taking out joint out of splines. Do not place the CV drive shaft on rough / uncleaned surfaces. This might damage the drive shaft boot. 19. Remove Starter Motor. 20. Lower the car & give support to the gear box from Bottom side. 21. Remove B-Mount Nut & Loosen B Mounting stud as shown 22. Uplift the car & give support to the Gear Box from bottom side. 23. Remove gear box Housing mounting bolts on Engine from top side. 24. Remove gear box Housing mounting bolts on Engine from Bottom side. 25. Remove C-Mount Bracket mounting bolt 26. Lower Gear Box with AMT KIT using Device. FITMENT: For fitment follow the reverse procedure of removal.