TIAGO BSVI MCE - SERVICE MANUAL

1.2L REVOTRON ENGINE 152  Connector View :  Connector Details: Connector Description 1 Coolant Temp Signal 2 Ground  Component Specification : The engine coolant temperature sensor measures the temperature of the engine coolant. Coolant temperature sensor is a Negative Temperature Coefficient type Sensor. The sensing element, together with the resistance network in the Engine Management System (EMS) module, provides a signal proportional to the coolant temperature to the EMS module. A reference voltage is provided to the sensor/network by the module. The water temperature sensor, 16TT provides water temperature input to ECU when placed in water stream. The 16TT has negative temperature coefficient with a 2 pin connector, is a semiconductor material which changes resistance depending on the surrounding temperature. The resistance decreases as temperature increases. Water temperature sensor is mounted on cylinder head (before thermostat), which is in contact with the engine coolant and tightened to a specified torque  Sensor Stand alone Diagnosis : Use multimeter to check for coil resistance across pin 1 and pin 2, which should be between 2500_ at 200C and 833.9_ at 500C. 1. ECU M1D4 :- -ve 2. ECU M1E4 :- +ve Use TATA diagnosis tool to check for 'Water Temp' values. Measure the temperature between the Sensor terminals. At room temperature of 35 degrees, the resistance shall be 1763 Ohms. v.