TIAGO BSVI MCE - SERVICE MANUAL

1.2L REVOTRON ENGINE 101 FITMENT Follow the reverse order of removal for fitment.  TANK UNIT REMOVAL CAUTION  Unless replacement is necessary, Tank unit, fuel level sensor should not be removed from the tank since the rubber parts i.e. gasket, seals etc. may harden when exposed to air and light.  Never apply an excessive force to the tank unit nipple or lead wire. This may result in bent or poor contact. 1. Fold the 2 nd row Seat and somersault it to access the in tank pump cut out. 2. Lift the carpet with foam at the cutout. 3. Loosen and remove the four screws of the cutout cover and remove it. 4. Disconnect the connecter (1) and then disconnect the fuel lines i.e. Delivery line (2), Return Line (3) and the Tank pressure valve line (4). 5. Loosen and remove the 6 mounting nuts. 6. Remove the locking ring. 7. Lift the in-tank pump carefully out from the tank. FITMENT Follow the reverse order of removal for fitment. INSPECTION Use multimeter to confirm that the resistance of the fuel level sensor changes with the level of float position.