TIAGO BSVI MCE - SERVICE MANUAL

1.2L REVOTRON ENGINE 93 28. Remove the B Mount nuts and Loosen B Mount Stud. 29. Remove the “A”- mounting bracket nuts (3 nos) from engine side. 30. Remove the “C” mount. 31. Now move the two post lift upwards and place the support stand, under the engine. (Use a suitable wooden block or other support for additional height as necessary.) SPECIAL TOOL  Engine Support stand -: 5424 5890 24 01 32. Now slightly lower the lift until engine and transaxle assembly is securely placed / fix on the support stand. 33. Disconnect the lifting crane from the engine. CAUTION  Use care when raising the vehicle off the engine and transaxle assembly. Verify all components and electrical connections are disconnected prior to raising the vehicle, or vehicle damage occur. 34. Now carefully move the lift up. 35. Take out the engine and transaxle assembly along with support stand. 36. Remove the starter motor, alternator along with its mounting brackets. 37. Remove the engine wiring harness. 38. Remove the transaxle from the engine. 39. Fix the LH & RH mounting brackets to the engine. SPECIAL TOOL  LH Mounting Bracket -: 2702 5890 24 03  RH Mounting Bracket -: 5424 5890 24 02 40. Safely lift the engine with the help of crane and fix it on overhaul stand.