ZEST BOLT Service Manual

SRS 19 10.6.8 SIDE RSU OR SIDE IMPACT SENSOR Removal 1. Disconnect battery and wait for 2 minutes. 2. Remove the B pillar upper and lower trim. 3. Disconnect the seat belt pre tensioner connection and remove the seat belt unit assembly. 4. Disconnect assy. W/H airbag connector from assy. side impact sensor. 5. Unscrew hex flange bolt and take out side impact sensor. Note: Connector pin out details of assy. side impact sensor are same as front impact sensor. Installation 1. Locate the side impact sensor into assy. side impact sensor mounting bracket cutout by locator provided in impact sensor. 2. Tighten the side impact sensor on assy. side impact sensor mounting bracket by using hex. Flange bolt to specified torque (0.8 ± 1.0 Kgm) 3. Reconnect the airbag wiring harness connector in to side impact sensor. 4. Refit the seat belt unit and its connector and the trims on the B pillar. 5. Reconnect battery.