ZEST BOLT Service Manual

BODY 15 12. Wheel Arch Trim :  Removal : 1. Remove the rear door primary seal, just enough to remove the wheel arch trim. 2. Remove the screw off grommet which is used for bottom fixation. 3. Gently start removing the wheel arch trim from top side (C pillar upper interface), Starting with removal of snap. 4. Remove the trim clips at all three corresponding BIW hole locations. 5. Remove the wheel arch trim off the BIW along it's locators direction. 6. Take off the wheel arch trim, by removing the lugs of wheel arch trim from scuff plate interface.  Re-Fitment :  Carry out the removal process in reverse order in appropriate sequence for re-fitment of Wheel arch trim.