ZEST BOLT Service Manual

BODY 13 10. Rear Quarter Trim (RQT) :  Removal : 1. Remove the rear door primary seal just enough to remove the Rear Quarter Trim. 2. Remove the rear seat back. 3. Remove the seat belt bezel from the cutout given in C pillar upper, which is fixed through 2 lugs at bottom edge and snaps at top edge. Ensure correct fitment after snapping action. 4. Remove plastic rivet clip which is used for fixation in X direction. It is hidden by rear seat back. 5. Remove the RQT, start with removal of snap engagement between RQT and WAT (Desnapping action). 6. Now remove the trim by gently pulling it out from BIW. There are 5 trim clips and 2 locators for C pillar upper. Remove the trim along it's locators axis to avoid the damage to trim.  Re-Fitment :  Carry out the removal process in reverse order in appropriate sequence for re-fitment of C pillar upper (RQT).