ZEST BOLT Service Manual

BODY 49 7. Remove 3 screws of the door pull inner. 8. Remove door trim screw, which is located at the bottom of door. 9. Insert plastic wedge pin & remove the door trim. 10. Pry out the polyethylene sheet from the door carefully. 11. Disconnect the electrical connection of the door latch. 13. Remove the linkages from the door unlock and lock lever after unscrewing the bell crank lever bracket. 14.Disconnect the latch linkages (two linkage from door handle outer and 2 from door lock and unlock lever inner. In case of auto lock unit only one linkage from door lock outer to latch.