ZEST BOLT Service Manual

BODY 36 ASSEMBLY 1. Assemble dashboard along with HVAC/FATC and steering. 2. Assembly place on the two locaters on LH and RH as shown in fig. 3. Connect all wiring harness and earthing connections. 4. Tighten trailing link bottom fixing screw. 5. By using battery tool tighten the fasteners on LH and RH side as shown in fig. 6. Connect steering column. 7. Connect roof lamp connection. 8. Press fit the end cover RH and LH. 9.9.15 WIRE HARNESS SERVICING REMOVAL 1. Remove wire harness connection on a pillar. 2. Remove door and main wire harness connections on both sides 3. Remove the heater tube connections, drain tube connections.