ZEST BOLT Service Manual

SUSPENSION 36 15. Disconnect the bundy pipe/Hose from wheel cylinder. Remove bleed screw. Put rubber dust cap on to the bundy pipe to avoid brake fluid from spilling and contamination. 16. Remove the stub axle and back plate along with brake shoe assembly as shown in figure 17. Remove the shock absorber lower bolts and coil springs. (Refer removal and refitment of shock absorber and coil springs) 18. Loosen and remove the twist beam bracket bolts on both sides. 19. Lower the twist beam along with bracket 20. Remove the twist beam cross bolt on both sides 21. Twist beam bush removal Remove twist beam front pivot bush using special tools as shown in below arrangement. NOTE: Apply soap water to the bush and the bore of twist beam assembly before installation.