ZEST BOLT Service Manual

SUSPENSION 34 9. REAR BRAKE DRUM BEARING REMOVAL. Fit the special tool part no (2871 5890 4202) to the brake drum and pry out the bearing using press after removing the circlip over it CAUTION: Bearing removed from brake drum should not be reused again. 10. REAR BRAKE DRUM BEARING FITMENT Insert the new bearing to the brake drum using the bearing installer special tool part no (2871 5890 4202) as shown in the Figure. 10a fit the circlip 11. Detach the hand brake cable from the lever on the trailing shoe by moving the lever towards the centre of the brake and removing the cable nipple from its location in the end of the lever as shown in Figure.