ZEST BOLT Service Manual

SUSPENSION 1 6.1 TECHNICAL SPECIFICATIONS AND TIGHTENING TORQUES 6.1.1 SPECIFICATIONS : (A) Front Suspension Type: Independent, lower wishbone, McPherson strut type with anti roll bar at front. (B) Rear Suspension Type: Semi Independent, twist beam with coil spring and shock absorbers. (C) Wheels and Tyres Tyres: 175/65 R14 82T Tubeless tyre and 175/65 R15 84T Tyre geometry: A tyre of size 175/65 R14 82T is made up of following information: 175 - Tyre section width in millimeters 65 - Aspect ratio in % (the height of the side wall divided by the tyre’s width) R - Tyre’s construction type - in this case it’s a radial type 14 - Rim diameter in inches 82T - Service description (Load Index + Speed Symbol) Tyre pressure: Front: 33 to 35 psi Rear: 28 to 32 psi Wheel Rims: 5J X 14” steel rims and 5.5J x 15'' (D) Steering geometry (In unladen condition) Front axle Rear axle Toe - in (mm) Not applicable Toe - out (mm) 0 -13' Camber angle 30' ± 30' 12' ± 15' (Fixed) Caster angle 3.1°± 45' Not applicable King pin angle 11.90 Not applicable Not applicable Not applicable