ZEST BOLT Service Manual

DRIVETRAIN-TA65 Star 44 27. Remove the adaptor part no. 2702 5890 2611 for locking input shaft. Tap the input shaft gently from the spline end also top the lay shaft. 28. Pry out the input shaft, and lay shaft along with shifter shaft assembly from the clutch housing. 29. Remove the differential assembly from the housing front. 30. Remove the input shaft cover by removing M6 * Mounting Bolts. 31. Try out the oil seal from the cover (if damaged) and replace it with new one. 32. Remove hex flanged screw holding release lever on to release yoke and take out release lever from release yoke. 33. Remove the plastic bushes at both ends of clutch release fork and remove the clutch release shaft from inside. 34. Remove oil seals of drive shaft from differential housing. Replace it with a new one while assembling. 35. Remove bearing outer races of differential side bearing along with shims. Ensure that outer races are not interchanged. NOTE: SHIMS SHOULD NOT BE REUSED.