ZEST BOLT Service Manual

Automated Manual Transmission 57 Electro-Hydraulic Selection Gearbox Wiring Mounting Bracket Fitment 1. Place the electro-hydraulic selection gear- box wiring mounting bracket back in its housing and fit the fixing rivets using a suitable tool. 2. Engage the wiring with the retaining clip. 3. Fit battery support/drip tray. 4. Fit battery. Wiring For Manual Gearbox Hydraulic Selec- tion System on Hydraulic Selection Unit Removal 1. Place the car on a lift. 2. Remove protection/guard under engine. 3. Remove battery. 4. Remove battery support/drip tray. 5. Disconnect the electrical connection for the gearbox input speed sensor and re- lease the wiring from the tank. Sr. No Name Connector 1 Gearbox input speed sensor Transmission output speed sensor 6. Disconnect the electro-hydraulic selection system wiring coupling. 7. Open the clip and release the wiring. Sr. No Name Connector 1 Gearbox sensor coupling Transmission sensors coupling 8. Disconnect the electrical connection for the clutch control solenoid valve. Sr. No Name Connector 1 Clutch control solenoid valve clutch control solenoid