ZEST BOLT Service Manual

Automated Manual Transmission 36 Hydraulic Clutch Actuator with Coaxial Con- trol with Gearbox Removed Removal Valid For Versions with Robotised Gearbox: 1. Raise the clip and disconnect the pipe from master cylinder to clutch release actuator, actuator side. 1. Loosen the screws (1a) and remove the clutch hydraulic actuator (1b) releasing it from the sealant. Remove the residues of sealant from the clutch - gearbox hydraulic actuator contact surfaces. The hydraulic actuator includes the clutch position sensor, which is not individually managed at the Spare Parts Department. Hydraulic Clutch Actuator with Coaxial Con- trol with Gearbox Removed Fitment Valid For Versions with Robotised Gearbox: Lay a bead of sealant on the clutch - gear- box hydraulic actuator contact surfaces. 1. Fit the hydraulic clutch actuator (1a) in place and tighten the screws (1b) to the pre- scribed torque. Component Fixing Dia Value (Nm) Clutch Control coaxial actua- tor Screw M6 9 – 11 Connect the pipe from master cylinder to clutch release actuator, actuator side, complete with new 0-ring and engage the retaining clip.