ZEST BOLT Service Manual

DRIVETRAIN C549 5 3. Connect the clutch fluid pipe to the operating cylinder and secure it using the clip. 4. Bleed the air from the clutch circuit, for procedure refers CLUTCH SLAVE CYLINDERBLEEDING PROCEDURE. 5. Top-up the brake fluid if necessary. C. CLUTCH SLAVE CYLINDER BLEEDING PROCEDURE NOTE:  Two technicians are required for this process. One to be seated on the driver seat.  Ensure that the brake fluid in the reservoir is filled little beyond the max. Mark. 1. Position the vehicle on a two- post lift and raise it to a height, where it is convenient to the technician to access the clutch slave cylinder. 2. Remove the cap (1) on the bleed valve on the clutch slave cylinder body, and connect the bleed pipe. 3. Lift the clip (2) halfway and slightly pulls out the clutch fluid pipe (3) till it is stopped by the lifted clip. 4. Keep pumping the clutch pedal till the air bubbles stop completely and only oil comes out of the bleed valve.