ZEST BOLT Service Manual

ENGINE 1.3L QUADRAJET (90PS) 35 3A.1.2.2.4 CYLINDER HEAD – OVERHAUL 1. Position the camshaft housing (1a) in a vice using the tool (1b) 287158900624 (Mount). 2. Remove the bolts (1a) and remove the vacuum unit (1b). 3. Remove the gasket (2). 4. Remove the bolts (3a) and remove the pressure pump (3b) complete with O-ring. Remove the joint (4). 5. Remove the bolt (1a) and remove the cam angle sensor (1b). 6. Temporarily remove the tool 287158900655 (Template) fitted previously on the exhaust side camshaft. 7. Check that the camshaft end float is within the recommended values of 0.15 mm ~ 0.34 mm using a dial gauge.. 8. If the camshaft end float is not within the recommended values, replace the worn components when reassembling the cylinder head. 9. Remove plug (1a) and fit tool 287158900655 (Template) (1b) on the intake side camshaft.