ZEST BOLT Service Manual

ELECTRICAL 97 4 Distance To Empty Indicates approximate distance that your car can travel with available usable fuel in tank with current Average Fuel consumption rate and it is displayed in “km”. This value may differ from the actual driving distance available. DTE will provide rolling text warning as ‘REFUEL’ at approximately 25 km distance to empty. DTE working range is from 25 km to 1999 km. Notice: If DTE is displayed as ‘---‘ , take your vehicle to authorized TATA MOTORS service station. The DTE will update with new value when fuel is added more than 4 Liters at a time. The average fuel consumption and distance to empty values may vary significantly based on driving conditions, driving habits, and condition of the vehicle. The distance to empty value is an estimate of the available driving distance. If low fuel warning light comes on, fill the fuel tank immediately regardless the value of displayed DTE. If vehicle is not on level ground and negative of battery has been disturbed, the DTE function may not operate correctly. You can change the DTE unit as km or mi using SET and MODE buttons. ‘mi’ is applicable for Export variant only. 5 Instantaneous fuel Economy (INST FE) Updates display “Instantaneous Fuel consumption” at regular time interval in bar graph. Maintain INST FE bar graph above 15 km/l to achieve better fuel economy. Note: INST FE will vary frequently as per driving pattern. The INST FE display does show Fuel Economy of last drive. It indicates Instantaneous Fuel economy of current Drive when Ignition is turned ON. The display does not show actual value unless vehicle is moving. The indication on the display may be delayed if fuel consumption is affected by driving pattern. You can change the INST FE unit as km/l or Miles per Gallon (MPG UK) using SET and MODE buttons. ‘MPG’ is applicable for Export variant only. For km/l setting, the indicated maximum value of INST FE is 30 km/l. No more than 30 will be indicated on the display even if the actual INST FE is higher than 30 km/l. For MPG setting, the indicated maximum value of INST FE is 80 MPG. No more than 80 will be indicated on the display even if the actual INST FE is higher than 80 MPG.