ZEST BOLT Service Manual

ELECTRICAL 41 12.8.8 TAIL LAMP Tail lamp consists of the following bulbs: 1. Turn indicator 2. Reverse 3. Tail/Stop light It is fitted on D pillar. REMOVAL AND REFITMENT OF TAIL LAMP REMOVAL 1. Remove Tail lamp fastener: 2. Remove Tail lamp top from locating point. 3. Remove bottom tail lamp from locating point. REFITMENT: 1. Connect the connector first and locate bottom tail lamp at its proper place & fix the fasteners. After insertion in the grommet. 2. Locate tail lamp top at its proper place & fix the fasteners after insertion in the grommet. REPLACING TAIL LAMP BULB: 1. Make sure lighting stalk is in ‘OFF’ position. 2. Remove the tail lamp: refer "Removal & Refitment of tail lamp". 3. Rotate and pull out the socket with bulb to be replaced. 4. Carefully remove the fused bulb from the socket by rotating and pulling it.