ZEST BOLT Service Manual

ELECTRICAL 30 Both lamps not working 1.Fog lamp fuse (20A) in cabin F/R box blown Check for short in the circuit and then replace the fuse 2.Front fog lamp relay(20A) in Engine F/R Box faulty Replace relay 3. Front fog lamp switch faulty Replace switch 4. No output from BCM Refer BCM Diagnosis 1. Front fog lamp switch ground point E0 loose Tighten grounding properly 2. Bulb loose/fused Fix bulb properly. Replace if blown 3 REAR FOG LAMP (HIGH END) CONTROLLED BY BCM CONDITION POSSIBLE CAUSE CORRECTION/REFERENCE ITEM Single lamp not working 1. Grounding point no. E1(RH) or E2(LH) loose Tighten grounding properly 2. Bulb loose / fused Fix bulb properly in holder. Replace bulb if blown 3. No output from BCM Refer BCM Diagnosis Both lamps not working 1. Fog lamp fuse (20A) in F/R box blown cabin Check for short in the circuit and then replace the fuse 2. Rear fog lamp switch faulty Replace switch 3. No output from BCM Refer BCM Diagnosis Rear fog lamp switch on-state indication not lighting 1. Bulb loose/fused Fix bulb properly. Replace if blown 2. Rear fog lamp switch ground point E9 loose Tighten grounding properly 4 INDICATOR LAMP WARNING LAMP AND OTHER LAMPS CONDITION POSSIBLE CAUSE CORRECTION/REFERENCE ITEM Front right / left signal lamps not working 1. Grounding point no. E6(RH) or E12 (LH) loose Tighten the grounding properly 2. 8 pole Head Lamp connector at the lamp loose Fix the connector properly 3. Bulb fused Fix the bulb properly. Replace bulb if blown