ZEST BOLT Service Manual

ELECTRICAL 4 5. Loose connectors could be troubled. Make sure that connectors are connected securely. 6. When removing a connector, be sure to pull only the connector, not the harness. 7. Remove connectors which have catches by pressing in the direction indicated by arrows in the illustration. 8. Connect connectors which have catches by inserting the connectors until a “snap” noise is heard. 9. Dirt / corroded terminals result in improper contact. The terminals should be cleaned carefully. Improper contact pressure between mating terminals disturbs the connectivity between them. Replace the damaged connector body to avoid exposure of the terminals in case of inadequate contact pressure. Ensure proper connection between the terminals to the wire. Rectify the loose connection by repairing / replacing the wire harness. Worn out insulation of the wire may result in short circuit. Avoid water entering in to the connectors.