ZEST BOLT Service Manual

AIR CONDITIONING 41 11.18 FULLY AUTOMATIC TEMPERATURE CONTROL (FATC) FATC system controls the in-cabin Temperature of the vehicle by automatically regulating the blower speed, adjusts the doors and compressor cycling and provides maximum passenger comfort regardless of outside weather conditions REMOVAL OF FATC FROM DASHBOARD 1. For removal FATC unit dashboard is required to remove first. For dashboard removal refer body chapter. 2. Place and hold the dashboard unit suitably. 3. Separate FATC unit from dashboard. 11.18.1 SERVICING OF ACTUATOR FOR DISTRIBUTION KINEMATICS 1. Remove connector from motor to detach it from wiring harness. 2. Remove three screws to change Actuator motor for Distribution mode. 11.18.2 SERVICING OF ACTUATOR FOR TEMPERATURE KINAMATICS 1. Remove connector from motor to detach it from wiring Harness. 2. Remove three screws to change Actuator motor for Distribution mode. 11.18.3 SERVICING OF THERMOSENSER/ THERMISTOR 1. Hold the Thermosenser by one hand and Pull the connector so that wiring harness can be detached from Thermosenser. 2. Pull Thermosenser as shown in fig to get it free from locking Snaps.