SAFARI BSVI - SERVICE MANUAL

ELECTRICAL 21 Both lamps not working 1.Fog lamp fuse (10A) in cabin F/R box blown Check for short in the circuit and then replace the fuse 2.Front fog lamp relay(20A) in Engine F/R Box faulty Replace relay 3. Front fog lamp switch faulty Replace switch 4. No output from BCM Refer BCM Diagnosis 5. Front fog lamp switch ground point loose Tighten grounding properly 6. Bulb loose/fused Fix bulb properly. Replace if blown 3 INDICATOR LAMP WARNING LAMP AND OTHER LAMPS CONDITION POSSIBLE CAUSE CORRECTION/REFERENCE ITEM Front right / left signal lamps not working 1. Grounding point loose Tighten the grounding properly 2. 10 pole Head Lamp connector at the lamp loose Fix the connector properly 3. Bulb fused Fix the bulb properly. Replace bulb if blown 4. No output from BCM Refer BCM Diagnosis Rear right / left turn signal lamps not working 1. Grounding point loose Tighten grounding properly 2. 8 pole Rear Lamp Connector loose Fix the connector properly 3. Bulb fused Fix the bulb properly. Replace bulb if blown 4. No output from BCM Refer BCM Diagnosis Both Turn Indicators not working 1. Flasher fuse (10A) in cabin fuse box loose/blown(BASE & MID) Fix fuse properly in the base. Replace fuse if blown 2. Flasher in cabin fuse box faulty(BASE & MID) Replace Flasher 3. No output from BCM (HIGH) Refer BCM Diagnosis Side repeater lamps not working 1. Connectors (2 pole) at the lamps loose Connect the connectors properly 2. Bulb loose/ blown Fix the bulb properly. Replace bulb if blown 3. Grounding point no. Tighten grounding properly