SAFARI BSVI - SERVICE MANUAL

SUSPENSION 27 ASSEMBLY: 1. Follow the above steps in reverse order in appropriate sequence for its assembly. 2. Tighten the heat shield screw to 1.2 ± 0.05 kg- m. 3. Tighten drive shaft nut 30 ± 1.5 kg-m torque and lock by staking. 4. Ensure that oil seal in transaxle is not damaged while fitting drive shaft. PRECAUTION: Use a new hub bearing and new circlip. SUB ASSEMBLY - KNUCKLE / HUB: Clean all the parts thoroughly and replace damage / worn out parts. 1. Fit bearing in the knuckle 2. Fit circlip. 3. Place the knuckle assembly over the hub. Press the knuckle assembly on the hub. 14. REMOVAL OF SUBFRAME ASSEMBLY 1. Remove the front wheel. 2. Remove the mounting bolts and take out the engine guard underbody. 3. Disconnect the anti-roll bar joint from ARB link.