SAFARI BSVI - SERVICE MANUAL

6F33 TRANSAXLE 18 8. REMOVAL AND RE-FITMENT A. TORQUE CONVERTER ASSEMBLY 1. Put the torque converter assembly to automatic transmission assembly smoothly. Always keep the transmission assembly parallel to the direction of the axis align when moving. CAUTION Apply the ATF to the oil pump seal before installing the torque converter assy. When you assembling the torque converter assembly to oil pump assembly, be careful not to damage of oil pump seal. Do not permit misalign of center axis between oil pump assembly and torque converter assy. (Oil seal damage by torque converter impeller hub) 2. Confirm the torque converter assembly condition before docking with engine. While matching the hole between Torque converter assembly and Engine, Please turn torque converter assembly carefully, if torque converter assembly turns smoothly then the torque converter assembly assembled condition is okay. WARNING When torque converter assembly re-assembly is needed, Technician should work carefully when docking torque converter During the reassembly, carefully push torque converter assembly into direction of the axis by turning torque converter assembly clockwise or counter-clockwise. This prevents the damage (wear, crack, etc) to the oil pump drive gear key caused by overloaded force exerted on torque converter assembly