SAFARI BSVI - SERVICE MANUAL

KRYOTEC ENGINE 94 7. In the order shown, tighten the cylinder head bolts to the proper (Torque Specifications). NOTE The value of 65 N•m (48 ft. lbs.) must be done with a combination of 20 N•m (15 ft. lbs.) and subsequently an increase of 45 N•m (33 ft. lbs.). 8. Install the hydraulic lifters in their bores complete with rockers. 9. Install the fuel injection pump support to the cylinder head and tighten the bolt (1) to the proper (Torque Specifications). 10. Install the dipstick tube to the engine and securely tighten the bolt. 11. Install the radiator hose and securely tighten the clamp. 12. Install the hose onto the oil vapor separator and securely tighten the clamp. 13. Install the upper bolt securing the oil vapor separator and securely tighten. 14. Connect the coolant return manifold quick connect coupling. 15. Position the wire harness and install the front screw. 16. Connect the boost pressure sensor wire harness connector. 17. Connect the glow plugs wire harness connectors. 18. Install the cylinder head cover (Refer to 09 - Engine/Cylinder Head/COVER(S), Cylinder Head/Removal and Installation). 19. Install the EGR cooler (Refer to 25 - Emissions Control/Exhaust Gas Recirculation, Diesel/COOLER, Exhaust Gas Recirculation (EGR)/Removal and Installation). 20. Install the battery tray (Refer to 08 - Electrical/Battery System/TRAY, Battery/Removal and Installation). 21. Install the engine cover (Refer to 09 - Engine/COVER, Engine/Removal and Installation).