ARIA

ENGINE 40 5. Disconnect the injector back leak tube (Overflow pipe ) and cover the injector side opening with suitable caps. 6. Remove the HP pipes connecting injector to common rail and cover the injector opening with suitable caps. NOTE Once removed HP lines should not be reused. As- semble the new HP Pipes at the time of assembly. 7. Loosen and remove the bolt (1) along with wash- er and remove the injector claw (2). 8. Extract the injector using injector removal tool (1) (Part no. 2868 5890 07 04). Remove the injector with the sealing washer. NOTE Injector should be tagged as soon as it is removed to avoid chances of it being interchanged. Since the I3C code of each injector is calibrated to the EMS, whenever an injector is replaced it I3C codes of the respective injectors should be fed in the EMS ECU using diagnostic tool. FITMENT • Follow the reverse order of removal for fitment. • Do not reuse the bolt and washer removed in step 6, use new ones. • Replace the injector sealing washer while refit- ting the injector. • Vacuum clean the injectors.