ARIA

ELECTRICAL 12 2.Pull out the speaker. Disconnect the connection and take out the speaker. REFITMENT: 1.Connect the electrical connection. 2.Fit the speaker on speaker spacer and tighten the three mounting screws of speaker. Tightening torque for screws – 0.3 Kgfm 3.Fit the door trim. NOTE: Same procedure is applicable for other door speakers. 4.4.3.2. CENTER SPEAKER: Center Speaker is a full range speaker produces mid frequencies. LOCATION: Center Speaker is mounted on dashboard. REMOVAL: 1.Remove the speaker grille ( Refer body section ). 2.Loosen and remove the two mounting screws of speaker. 3.Disconnect the electrical connection of speaker & take out the speaker. REFITMENT: Follow the reverse procedure for fitment.