ARIA

CLUTCH 20 8. Ensure that all the mounting nuts are removed from the control bracket and then take out the control bracket with clutch and brake pedal assembly from the vehicle . 9. Individually remove the clutch pedal and brake pedal from the control bracket. (For procedure refer Clutch pedal assembly removal from this section and brake pedal removal from brake section. INSPECTION 1. Check the clutch pedal for distortion or bending. 2. Check the return spring for damage or deterioration. 3. Check the rubber cover of pedal plate for damage or wear. 4. Check the clutch pedal lateral play. FITMENT For fitment follow the reverse procedure of removal. NOTE While assembling refer the stay rod assembly procedure & caution. NOTE • No clutch pedal play adjustment is required as this vehicle is fitted with Hydraulic System. • At the time of assembly apply thin coat of multi purpose grease on clevis pin. • Align the axis of clutch pedal hole with the Clutch master cylinder (CMC) fork hole and after inserting the clevis pin through Clutch master cylinder (CMC) fork and clutch pedal check the free rotation of clevis pin. • While putting back the stay rod along with the compression spring apply thin coat of multi purpose grease at the tip of the pivot pin in order to reduce friction. • Ensure the clutch pedal bush is fitted at the time of assembly. • NEVER bleed the CSC if the clutch and flywheel are not yet assembled.