ARIA

ENGINE 178 2. Loosen and remove the 4 mounting nuts (1) and remove the accelerator pedal module. INSPECTION Check the resistance • 1.7K ohm +/- 0.8 between terminals 1 & 5 • 1.2K ohm +/- 0.5 between terminals 2 & 3 REFITMENT 1. Locate accelerator pedal module and fit 4 mounting nuts. 2. Connect the accelerator pedal electrical connect- or (1) to the accelerator pedal module. 12. BRAKE SWITCH The brake pedal is fitted with two Brake switches, which provide the information to ECU about the brake pedal application. • Upper brake switch give signal to EMS ECU for cruise control functionality. • Lower brake switch give signal to tail lamp& ABS/ESP ECU. NOTE Brake switch for cruise control is fitted only if the ve- hicle is having cruise control feature. LOCATION Brake switches are fitted on brake light switch mounting bracket.