ARIA

ENGINE 153 SYSTEM FLOW For system flow schematic refer air intake system schematic layout. The exhaust gases are made to pass through the turbine which will rotate the compressor mounted on the same shaft on the air inlet side. The air from the air filter is sucked by compressor. The compressed air then flows through an intercooler and then to the intake manifold. For more information refer Air intake system. PIN OUT PIN OUT FUNCTION 1 POWER 2 GROUND 3 C.A.N HIGH 4 PWM (OPTIONAL) 5 C.A.N LOW 2.1.8.3.2 MAINTENANCE 2.1.8.3.2.1 ON VEHICLE REPAIRS A. TURBOCHARGER REMOVAL 1. Disconnect the battery connection. 2. Pull out the Engine cover. 3. Remove the Air Filter assembly. (Refer air filter removal procedure). 4. Disconnect the electrical connection of the turbo- charger. 5. Remove the Turbocharger heat shield (1) by re- moving the two mounting bolts.