HARRIER SERVICE MANUAL PART -1

KRYOTEC ENGINE 86 3. Remove injector claws and then remove fuel injectors. NOTE Start removing injectors from timing belt side. Use injector puller for removing injectors. (Injector Holder -: 5412 5890 0701). 4. Remove H.P. pump to fuel rail high pressure line. NOTE Do not reuse the HP pipes once removed; use new HP pipes at the time of assembly. 5. Remove the mounting bolts of the fuel rail and take it out. iii. REMOVAL OF EXHAUST MANIFOLD AND OTHER COMPONENTS 1. Remove all temperature sensors on DPF assembly. NOTE Temperature sensors have locater. Care should be taken when istalling and removing.