HARRIER SERVICE MANUAL PART -1

KRYOTEC ENGINE 71 D. FUEL TANK REMOVAL 1. Relieve fuel pressure in fuel feed line. 2. Disconnect negative cable at battery. 3. Remove Exhaust pipe with main silencer. (For removal refer ‘Exhaust Pipe’ removal process). 4. Remove the parking brake cable routed on the tank’s parking brake clamp. 5. Disconnect the fuel filler hose and breather tube Quick connector from filler pipe assembly. 6. Support the fuel tank from below. 7. Remove the four mounting bolts from fuel tank mounting straps and lower fuel tank gradually until electrical connector of Fuel Delivery Module and passive side suction unit can be reached to disconnect. 8. Disconnect the electrical connections of the in- tank pump and the fuel lines. (For removal refer ‘Tank Unit’ removal process). 9. Disconnect electrical connections of the suction unit. 10.Remove fuel tank from vehicle NOTE Make sure breather line quick connector is not getting stuck up during its removal along with tank. Seals and gasket not to be reused. INSPECTION  Check all hoses and pipes connected to fuel pump for leaks, loose connections, deterioration or damage. Replace if necessary.  Check fuel pump and passive side suction unit module gaskets for leaks, cracks etc. Replace if necessary.  Visually inspect fuel tank for leaks and damage. Replace if necessary. FITMENT For fitment follow removal procedure in reverse.