HARRIER SERVICE MANUAL PART -1

ELECTRICAL 103 REMOVAL& INSTALLATION REMOVAL 1. Remove the door trims (Refer Body Section for removal procedure) . 2. Gently pry out the switch bezel fromthefront door by pushing the mounting clip with the screwdriver. 3. Remove the switch assembly from bezel. 4. Disconnect the electrical connector & take out the switch assy. Same procedures are to be followed for co-drivers and passengers window module switches INSTALLATION 1. Connect the electrical connector of switch. 2. Position the switch onto the bezel and push fit the assembly. NOTE Follow the same procedure to remove remaining door window winding switches.