HARRIER SERVICE MANUAL PART -1

KRYOTEC ENGINE 32 v. DRAINING WATER FROM FUEL FILTER 1. Stop the engine allow the pressure to stabilize. 2. Disconnect the electrical connection of the fuel filter and also disconnect one of the fuel lines either inlet or outlet. 3. Loosen the water drain port nipple. Connect suitable tool to the water drain port and drain water. 4. Reconnect the fuel line and electrical connection that was disconnected. NOTE Drain the water from the fuel filter during every service. v i . AC COMPRESSOR, ALTERNATOR BELT REPLACEMENT REMOVAL 1. Lift the vehicle and remove the RH side front wheel. (For procedure refer wheel section). 2. Remove the RH front wheel arch. (For procedure refer Body section). 3. Loosen the belt tensioner by rotating bolt in anticlockwise direction and lock using special tool (5412 5890 0605) .