HARRIER SERVICE MANUAL PART -1

BRAKES 37  Remove the upper sliding bolt and take out the caliper housing. (Lower sliding bolt is already taken out while removing the pads.) FITMENT For fitment follow the reverse procedure of removal. B. BRAKE DISC REMOVAL FRONT BRAKE DISC REMOVAL For front brake disc removal refer Front Axle section. DISC INSPECTION Before assembling the caliper back to the carrier, the disc should be inspected. The disc should be cleaned with dry cloth, oil traces to be wiped out completely. The disc should be free from score marks. If scored, it should be ground and refitted. NOTE Minimum thickness of front disc = 24mm After fitment, the run out of the disc should be measured. (For procedure refer disc run-out measurement procedure.) The run out should be less than 0.060 mm otherwise pedal pulsation will be felt during brake application. NOTE Before assembly clean the mating faces of the hub and brake disc. FITMENT For fitment follow reverse procedure of removal.