HARRIER SERVICE MANUAL PART -1

BRAKES 31 11.After the bleeding sequence is completed remove the bleed tube and place the dust cap on the bleed screw. 12.Ensure that the bleed screw is tightened to the recommended torque. NOTE After the bleeding is done check for any leaks in the bleed screw by applying the brake pedal hard. C. CALIPER PAD REPLACEMENT NOTE Caliper pad replacement for front and rear caliper can be done in similar manner, therefore follow the same procedure of caliper pad replacement for removal of rear caliper pads after removal of rear tyres. 1. Keep the gear shifter lever in neutral position. 2. Apply the parking brake. 3. Jack the vehicle and remove the front wheel. 4. Loosen and remove the bottom sliding pin bolt. NOTE Before removing the sliding pin bolt, ensure that the pedal is fully depressed i.e. caliper is fully returned at zero condition. 5. Swing the caliper up, hold with one hand and then remove the pads one after the other.