HARRIER SERVICE MANUAL PART -1

SUSPENSION 21 13. Remove Hex flange screw mountings on Brake caliper. 14. Remove wheel speed sensor. 15. Remove front strut holding Nyloc nut mounting on knuckle. 16. Remove Wiper blades. 17. Remove Leaf screen Assembly by disconnecting washer pipe connection. 18. Remove three mountings on Front strut. 19. Separate the Front strut from vehicle. FITMENT: Follow the reverse procedure. NOTE: 1. Tighten all bolts and nuts to specified torque mention in Torque table. 2. Do not reuse the fastener of lower arm to knuckle assembly. 3. Apply ADH thread locker wicking grade ANABOND 124 at nut end and bolt thread. Ensure that the threads are free from oil/grease. CAUTION: 1. Ensure that brake hose does not damage